The Trail Finder 2 LWB has both style and aggressive
performance.You can find a balance of scale details and performance into
Performance is smooth with its R3
Scale Single Speed transmission, 4WD drivetrain, Bulletproof Transfer
Case, and quality metal components. The front axles have been upgraded
with XVDs, providing sturdier construction and a greater steering angle
than stock counterparts. The Trail Finder 2 LWB is a product of
innovative engineering that impresses in appearance and performance.
Trail Finder 2 LWB is fully compatible with an array of options and
performance enhancements crafted to elevate the user experience and
enhance the authenticity of a 1/10 off-road truck!
Realistic Billet Aluminum Ladder Frame Chassis
R3 Scale Single Speed Transmission
Center Mounted Realistic 4x4 Transfer Case
K44 Ultimate Scale Cast Front Axle with Upgraded XVD's
K44 Ultimate Scale Cast Rear Axle
Super Scale 70mm White Shocks W/ Internal Springs
RC4WD Marlin Crawler Side Plastic Sliders
Soft Steel Leaf Springs
Hammer Transfer Case
Gears: Wide .8 Mod Steel Gears
Features: 8 Bearings, Cast Casing, Hardened Gears
R3 Scale Single Speed Transmission
Ratios: Pinion/Spur 14/64 = 1:4.57
Internal Ratio: 1.78:1
Gears: Wide Steel .8 Mod, Delrin Spur, Slipper Clutch
K44 Ultimate Scale Cast Axles
Hex To Hex Width: 177mm (6.96")
Trail Finder 2 “LWB” Chassis
Features: Billet Aluminum Construction, Adjustable Shock Hoops
High Quality Plastic Material, Durable Steel Yokes
Trail Finder 2 "LWB" Truck Dimensions
Height: 118mm (4.65")
Final Drive Ratios: 31.9:1
The R3 Single Speed
Transmission comes with a tough cast metal case and wider gears to allow
for more abuse along with a Delrin Spur with Slipper Clutch. It also
features a sturdy billet aluminum motor mount for durability.
Trail Finder 2 LWB Kit includes the Hammer Transfer Case. Packed with
detail, the case features a cast metal exterior and the same 0.8 Mod
widened gears for durability.
Drawing on the
success of the RC4WD MOA gear sets, the Trail Finder 2 LWB Kit
Drivetrain has the most durable gears RC4WD has to offer so the Trail
Finder 2 LWB Kit can stay on the trail, day after day.
most scale-accurate axles in the market, the RC4WD Yota II Ultimate
Scale Cast Axles feature innovative round knuckles, lower mounting
points, XVDs for the front axles and compact offset pumpkins.
Drive Shafts for the Trail Finder 2 LWB Kit are an all new design
featuring bulletproof steel universals and a new high quality plastic
shaft for great driveline angles and durability on the trail.
The Trail Finder 2 LWB Kit Chassis features a molded fuel cell that
doubles as an electronics storage box and an aluminum, frame mounted
under the cab electronics tray for multiple electronics tray for
multiple mounting options for your electronics.
The Trail Finder 2 LWB Kit includes a set of RC4WD Ultimate Scale
Shocks. These shocks are designed for ultimate scale looks and optimum
performance. They’re machinedfrom billet aluminum, are internally sprung
and are completely rebuildable!
The Trail Finder 2 LWB Kit Chassis is a machined billet aluminum
ladder frame design with leaf springs, scale shock hoops, chassis servo
mounts hard body mounts for maximum strength.
Soft Steel Leaf Springs are constructed from high-quality material
to reduce stiction. The unique sizing for this set is designed for a
more finely tuned ride.
The RC4WD Marlin Crawler Side Plastic Sliders for Trail Finder 2
LWB are scale replicas designed to protect and mitigate the rough
impacts of crawling over rocky terrain and trails!
- 1x RC4WD Trail Finder 2 "LWB" 1/10 Scale Builders Kit
This is a kit that requires building time (appro. 2-3 hours), electronics, tires and wheels.
Required to Complete:
- Hex Drivers (1.5mm, 2mm, 2.5mm)
- Long Nose Pliers
- Associated Thread Locking Adhesive
- Cross Wrench or Nut Driver (4mm, 5.5mm, 7mm)
some components may come assembled, we always recommend that you check
the products to ensure all hardware is tight. In some cases, you may
want to apply thread lock to some of the hardware that is already
- Use good quality hex drivers to avoid stripping screw heads.
- Use thread lock sparingly.
- Do not over tighten screws, otherwise you may strip the thread.