Scale Steel Punisher Shaft V3 (90.5mm - 110.5mm / 3.56" - 4.35") 5mm Hole

Scale Steel Punisher Shaft V3 (90.5mm - 110.5mm / 3.56" - 4.35") 5mm Hole

Your Price: $34.99
Retail Price:$43.04
Your Savings:$8.05(19%)
In stock
Part Number:Z-S0826
Scale Steel Punisher Shaft V3 (90.5mm - 110.5mm / 3.56" - 4.35") 5mm Hole

Now in third generation design! Works with most trucks and transmissions. Designed to allow more smooth rotation and strength.


  • Advanced internal spline
  • Industrial Grade Steel
  • Uni-Joint for super smooth operation
  • Engineered and manufactured by RC4WD
  • Direct fit, no modification needed
  • Weight: 1.48oz / 42g
  • OD: 0.43in / 11mm
  • Travel Distance: 3.56in / 4.35in - 90.5mm / 110.5mm
  • Shaft Size: 0.29in / 7.45mm




Shown mounted on the Gelande 2 (Z-K0001) for example (Not Included)




What's Included:

  • 1x Scale Steel Punisher Shaft V3 (90.5mm - 110.5mm / 3.56" - 4.35") 5mm Hole
  • 2x M3 x 5mm SSS (Z-S0125)
  • 2x M3 Driveshaft Pin (Z-S0804)


  • Fits Gelande 2 (Z-K0001) Front and Rear
  • Fits Trail Finder 2 (Z-K0042 "Disc")Front and Rear
  • Fits RC4WD Trail Finder 2 Truck Kit w/Mojave II Body Set (Z-K0049)
  • Fits Z-RTR0015 Rear
  • Fits Z-RTR0016 Front
  • Fits Z-RTR0001 Rear
  • Fits Z-RTR0011 Front, Rear and Center
  • Fits Z-RTR0014 Rear
  • Fits Z-RTR0017Front and Rear
  • Fits SCX10 Rear
  • Fits VATERRA Twin Hammers Rear
  • Please make sure to use a medium threadlock on the set screws.
  • Will replace front Traxxas TRX-4 driveshaft

To find out which Punisher Shaft fits which truck, click here to see a comparison chart.

Click here for instructions on how to measure for proper driveshaft length and compatibility.
5 Stars
Customers Service
First let me say Skyler is top notch with customer service! I simply reached out to see what could be done about my new shafts. I was expecting maybe a RMA# and replacing the broken part but oh no... He did way better and sent me 2 new complete drive shafts! That's how you treat your customers! Buy with confidence you will never be "shafted" LOL! As far as this part... I have my reservations. One broke the first 10 min I drove the cruiser and the second one has a pin coming out. My cruiser is stock too! Hopefully I was just unlucky and got a bad batch. I'll install these new pair and run them for a while before I upgrade electronics. Wish me luck.
Did you find this helpful? 
Reviewed by: (Verified Buyer)  from California. on 3/11/2019

Related Items

Recently Viewed Items