RC4WD D44 Narrow Front Axle (SCX10 Width)

RC4WD D44 Narrow Front Axle (SCX10 Width)

Your Price:$199.99
Retail Price:$245.99
Your Savings:$46.00(19%)
Out of Stock
Part Number:Z-A0114
RC4WD D44 Narrow Front Axle (SCX10 Width)
The all new D44 Axles are built just for the SCX10 series of trucks from Axial that use the AX10 Axles. These axles are a complete bolt in for trucks that use the AX10 Axles. They pack tons of features including XVD's, hardened steel gears, panhard bar setup and more. This axle allows you to get the steering servo off the axle and onto the chassis when paired with our CMS kit. Offers same gear ratio as the stock AX10 Axles.


  • Billet Aluminum
  • CNC Machined
  • Anodized Black
  • Removable Diff Cover
  • Panhard Bar Mount Built In
  • Modular System to Allow for Conversions
  • Heavy Duty Bevel Gear Set 38T/13T
  • 12mm Steel Wheel Hex
  • 5mm Axle Output Shaft
  • Weight: 9oz / 255g
  • Engineered and Manufactured by RC4WD

Shown installed with RC4WD Rock Hard 4x4 Full Width Front Bumper for Axial SCX10 Jeep (Z-S1338), Axial SCX10 Jeep Rubicon, D44 Link Set for SCX10 CMS (SCX10 Width) (Z-S1072) and Chassis Mounted Steering Servo Kit with Panhard Bar for Axial SCX10 (Z-S0923) for example (Not Included)

What's Included:

  • 1x RC4WD D44 Narrow Front Axle (SCX10 Width)
  • 2x 2mm Black Spacer (Z-S0600)
  • 2x 1mm Black Spacer (Z-S0809)

Other D44 Axles:
  • RC4WD D44 Wide Rear Axle (Wraith/AR60 Width) (Z-A0108)
  • RC4WD D44 Narrow Rear Axle (SCX10 Width) (Z-A0112)
  • RC4WD D44 Wide Front Axle (Wraith/AR60 Width) (Z-A0110)

Require Parts:
  • D44 Link Set for SCX10 CMS (SCX10 Width) (Z-S1072)

Optional Parts:

  • RC4WD Ballistic Fabrications D44 Axle Cover (Z-S1600)
  • RC4WD ARB Diff Cover for D44 Axle (Z-S1607)
  • Brass Knuckle Bushings for D44 Axle (8) (Z-S1716)
  • Differential Gear Set for D44 and Axial Axles (Z-G0079)
  • D44 Narrow Front Axle Servo Mount (Z-S1742)

Replacement Parts:
  • Heavy Duty Bevel Gear Set 38T/13T (Z-G0069)
  • D44 Steering Knuckles (Z-S0955)
  • D44 Narrow Front Axle Upper Link Mount (SCX10 Width) (Z-S1024)
  • D44 Panhard Mount for SCX10 CMS (SCX10 Width) (Z-S1071)
  • XVD Axle Shafts for D44 Narrow Front Axle (SCX10 Width) (Z-S0989)
  • 2x RC4WD 12mm Axle Wheel Hexes (2 way) (Z-S0238)
  • 2x Replacement Axle Hex Pins (12) (Z-S0277)
  • Heavy Duty Bevel Gear Set 38T/13T (Z-G0071)
  • Aluminum Diff Case for D44 and Axial Axles (Z-S1683)
  • Heavy Duty Differential Locker (Z-S1682)

Replacement Hardware:

  • 2x M4 Lock Nuts (Z-S0620)
  • 6x Metal Shield Bearing 5x11x4mm (Z-S0683)
  • 4x Metal Shield Bearing 10x15x4mm (Z-S0837)

Instruction Manual:

  • While some components may come assembled, it may be in your best interests to check the products to ensure all hardware is tight. In some cases you may want to apply threadlock to some of the hardware that is already installed.
  • Fits Axial Jeep Wrangler Rubicon but you will need Z-S1072, Z-S0923 and Z-S1105
5 Stars
Scale perfection!!
I installed my recently purchased D44 front and rear axles on my Axial SCX10 Honcho over the weekend, and I won't be able to say enough about them here. Attention to detail, fit, feel, finish, assembly, installation and, above all, performance were nothing less than stellar! I also purchased the ARB diff covers, and the aesthetic effect of the axles with the red covers and orange knuckles is stunning. My wife is jealous now! I installed the CMS and D44 link kits at the same time (a bit of a challenge for a noob with minimal instructions), and crawling yesterday was a completely different experience with the much enhanced turning radius and suspension travel. I'll admit the cost had me a bit apprehensive about pulling the trigger on these, but it was well worth it for the total satisfaction they've provided. RC4WD FTW!!
Did you find this helpful?  2 of 5 Found Helpful
Reviewed by: (Verified Buyer)  from NC, USA. on 6/6/2016

Related Items


Recently Viewed Items