RC4WD 90mm Old Man Emu Nitrocharger Sport Shocks by ARB

RC4WD 90mm Old Man Emu Nitrocharger Sport Shocks by ARB

Your Price:$34.99
Retail Price:$43.04
Your Savings:$8.05(19%)
In stock
Part Number:Z-D0038
RC4WD 90mm Old Man Emu Nitrocharger Sport Shocks by ARB

This is the all new Licensed Scale Shock to hit the market. Licensed from ARB 4x4 Accessories. These new shocks feature a complete new design from the ground up and are built and ready to handle the rocks. Your scale build will never be the same once you bolt up a set of these awesome looking shocks. Available only from RC4WD and our Dealers.



  • Machined Billet Aluminum
  • Old Man Emu Detailing
  • All New Internal Design
  • Internal Spring Design
  • Each Weight: 0.45oz / 13g
  • Hole to Hole (Compressed): 2.62in / 66.8mm
  • Hole to Hole (Uncompressed): 3.54in / 90mm
  • Overall Length: 3.87in / 98.4mm
  • Travel Length: 0.91in / 23.2mm
  • Shock Body OD: 0.39in / 10mm
  • Shaft Diameter: 0.13in / 3.5mm











Different Shocks boots shown installed on 90mm ARB shock for example (Not Included)


Shown installed on Traxxas TRX4 with 2mm Black Spacer with M3 Hole (10) (Z-S0600) and 3mm Black Spacer with M3 Hole (10) (Z-S0806) for example (Not Included)

What's Included:
  • 2x RC4WD 90mm Old Man Emu Nitrocharger Sport Shocks by ARB

Optional Parts:

  • Internal Springs for ARB and Superlift 90mm Shocks (Z-S1181)
  • RC4WD 80mm Old Man Emu Nitrocharger Sport Shock by ARB (Z-D0036)
  • RC4WD 70mm Old Man Emu Nitrocharger Sport Shock by ARB (Z-D0034)

Replacement Parts:

  • Rebuild Kit for Scale King, ARB & Superlift Shocks (Z-S0788)


  • Fits RC4WD Trail Finder 2 RTR w/Mojave II Body Set (Z-RTR0024), But you will need two 1mm spacers.
  • Fits Gmade Sawback
  • Fits Traxxas TRX-4, but will require both 2mm (Z-S0600) and 3mm (Z-S0806) Black Spacers with M3 Holes
  • For Black Rubber Boot Z-S0891
  • For Red Rubber Boot Z-S0948
  • For Yellow Rubber Boot Z-S0962
  • For Blue Rubber Boot Z-S0961
  • Use blue (medium) thread lock to the bottom shock shaft rod end before installing onto your vehicle to help keep it in place.

ARB is a registered trademark of the ARB company. The ARB logo is property of ARB and used under license to RC4WD.

5 Stars
These dampers are perfect for Tamiya High Lift (F350 and Toyota Hilux and Tundra), but to install a set are needed necklace 4mm x 3mm to be able to adjust.
Did you find this helpful?  9 of 16 Found Helpful
Reviewed by: (Verified Buyer)  from GUARULHOS, SP - BRAZIL. on 1/5/2015

Related Items

Recently Viewed Items