RC4WD 80mm Old Man Emu Nitrocharger Sport Shocks by ARB

RC4WD 80mm Old Man Emu Nitrocharger Sport Shocks by ARB

Your Price: $34.99
Retail Price:$43.04
Your Savings:$8.05(19%)
In stock
Part Number:Z-D0036
RC4WD 80mm Old Man Emu Nitrocharger Sport Shocks by ARB

This is the all new Licensed Scale Shock to hit the market. Licensed from ARB 4x4 Accessories. These new shocks feature a complete new design from the ground up and are built and ready to handle the rocks. Your scale build will never be the same once you bolt up a set of these awesome looking shocks. Available only from RC4WD and our Dealers.



  • Machined Billet Aluminum
  • Old Man Emu Detailing
  • All New Internal Design
  • Internal Spring Design
  • Each Weight: 0.42oz / 12g
  • Hole to Hole (Compressed): 2.4in / 61mm
  • Hole to Hole (Uncompressed): 3.15in / 80mm
  • Overall Length: 3.5in / 89mm
  • Travel Length: 0.66in / 17mm
  • Shock Body OD: 0.39in / 10mm
  • Shaft Diameter: 0.13in / 3.5mm









Different Shock boots shown installed on 80mm ARB shock for example (Not Included)


Shown installed with RC4WD Gelande II Truck Kit w/Cruiser Body Set (Z-K0051) for example (Not Included)

Shown installed on Traxxas TRX4 with 2mm Black Spacer with M3 Hole (10) (Z-S0600) and 3mm Black Spacer with M3 Hole (10) (Z-S0806) for example (Not Included)

What's Included:
  • 2x RC4WD 80mm Old Man Emu Nitrocharger Sport Shocks by ARB

Optional Parts:

  • Internal Springs for ARB and Superlift 80mm Shocks (Z-S1179)
  • RC4WD 70mm Old Man Emu Nitrocharger Sport Shocks by ARB (Z-D0034)
  • RC4WD 90mm Old Man Emu Nitrocharger Sport Shocks by ARB (Z-D0038)

Replacement Parts:

  • Rebuild Kit for Scale King, ARB & Superlift Shocks (Z-S0788)


  • For Black Rubber Boot Z-S0891
  • For Blue Rubber Boot Z-S0961
  • For Yellow Rubber Boot Z-S0962
  • For Red Rubber Boot Z-S0948
  • Use blue (medium) thread lock to the bottom shock shaft rod end before installing onto your vehicle to help keep it in place.
  • Fits Traxxas TRX-4, but will require both 2mm (Z-S0600) and 3mm (Z-S0806) Black Spacers with M3 Holes

ARB is a registered trademark of the ARB company. The ARB logo is property of ARBand used under license to RC4WD.

5 Stars
One of the most detailed shocks I have seen. Looking at machining of the overhaul shock the guys really done a good job and the quality is on a very high standard. I am using the 80mm on the front of my rig and the 90mm on the rear to give me the ability to have a bit more flex in the rear. The Old Man Emu Nitrocharger Sport Shocks by ARB are really good if you get the 4 different setup spring tensions kits (Z-S1179). Just make sure you order the right length kit for your shocks. I am running a small amount of 60W shock oil to keep the shock lubricated on the inside. The shock boots Z-S0891 also add a very nice scale look to the shocks and keeps the dirt and sand of the shock shaft that will minimizes the o-rings getting damaged and causing leakage.
Did you find this helpful?  4 of 7 Found Helpful
Reviewed by:  from Australia. on 7/4/2016
5 Stars
To me, it's all about scale and realism when I build a kit. Re-creating a model as close as possible to the real life version, or what it could have been. These licensed Old Man EMU shock absorbers absolutely compliments my builds in that area. Along with their great performance, I couldn't have asked for a better suited product to add to my builds.
Did you find this helpful?  1 of 1 Found Helpful
Reviewed by:  from South Africa. on 5/11/2017

Related Items

Recently Viewed Items