Blackwell X1 Front Scale Axle (Black)
Blackwell X1 Front Scale Axle (Black)

Blackwell X1 Front Scale Axle (Black)

Your Price: $179.99
Retail Price:$221.39
Your Savings:$41.40(19%)
Out of Stock
Part Number:Z-A0016
Blackwell X1 Front Scale Axle (Black)

Back for a limited run! Get yours before they're gone for good. The Blackwell X1 Front Scale Axle (Black) returns with its low pumpkin and removable diff cover. This axle is designed to fit 4x4, 6x6 and 8x8 trucks.

Blackwell Axle main features & specs:

  • Trailing Enclosed Knuckles
  • Removable Axle Tubes (each side)
  • Differential cover
  • Center Axle Case (banjo)
  • Differential Carrier (third member)
  • Standard overall Width Hex to Hex 7.56" (192mm)
  • Final Drive Ratio 3.75 : 1
  • Number of internal Gears 4
  • Internal Shafts 2
  • Number of Bearings and or Bushings 13
  • Axle Tube Thickness .5 inch (12.7mm)
  • Banjo Width 1.58 inch (40mm)
  • Knuckle Size 1.05 inch (26mm)
  • Center Clearance to Drive .71 inch (18mm)
  • Hex to Hex Width: 7.56in / 192mm
  • Pin to Pin Width: 7.12in / 181mm
  • Pumpkin Height: 1.97in / 50mm
  • Gear Ratio: 3.75:1
  • Output Shaft OD: 0.2in / 5mm
  • 12mm Steel Wheel Hex
  • Weight: 10.16oz / 288g

Blackwell X1 Axle additional specs:

  • CNC Machined Billet Aircraft Grade Aluminum Housing
  • Hardened Steel Spool Gear
  • 5mm Axle Input Shaft
  • Full Ball Bearings
  • Powder Coated in black
  • Engineered by Brett in Massachusetts USA
  • Manufactured by RC4WD

Actual product

Designed for 1:10 Scale Truck!

With Optional yoke added for 6x6 Setup:

With Brake:

With Rear Straight adaptor:

What's Included:
  • 1x Blackwell X1 Front Scale Axle (Black)
  • 2x Scale Knuckles
  • 1x Spool Gear
  • 2x 12mm Steel Wheel Hex
  • Complete Hardware and Bearings

Optional Parts:

  • This axle is designed to work with our R2 Transmission, Planetary Reduction Tranny, or Transfer Case


  • This axle is designed to fit 1.9 or 2.2 wheels that has a 12mm back hex.
  • To get more width, you can use 12mm widener (X-0132)

  • While some components may come assembled, it may be in your best interests to check the products to ensure all hardware is tight. In some cases you may want to apply threadlock to some of the hardware that is already installed.
  • For complete truck you will need 2 of this product.
  • Please click here for details on reversing the axles spinning direction.
4 Stars
I have had these axles for a little over a year now and have many things to say about them. Very beautiful axle straight out of the box, as mine came on the second to last Beast 6x6 v. 1 they had. The axle case itself is almost bombproof out of the box with about $5 needed in hardware to make these axles an absolute beast off road. Strongly recommend the XVD for the front the rears, forget about it stock axle shafts and gears can handle almost anything. Never had a breakage problem with these babies, so if you've got the money for a set of vanquish axles why not try something that looks better and is easier to modify and customize to your needs.
Did you find this helpful?  22 of 24 Found Helpful
Reviewed by:  from South Carolina. on 10/27/2015

Related Items


Recently Viewed Items