1/14 Scale R350 Compact Track Loader RTR
Due to the value of this product, the only forms of payment that will
be accepted are Affirm and Bank Transfer. Please do not choose Credit
Card or PayPal when checking out as we will cancel the order. Feel free
to email us at [email protected] if you have any questions.
Due to the size and weight of this product, this product has to be
shipped in its own container. It will be shipped only by Expedited
Shipping Service (5-8 days), this requires an extra shipping surcharge
of $170 to ship anywhere in the US and all international countries due
to the size and weight.
this surcharge should cover shipping fees to most international
countries, there may be some situations where the shipping fee may be
higher. In the event that this happens, we will reach out to you and
provide you with additional details. You may also email [email protected] before you place your order to request a shipping estimate to your shipping address.
note that the customer is responsible for any additional fees and
charges that may be incurred based on their country's clearance and tax
policies. Also, the product is subject to delays while going through
Notice: This product is for experienced RC hobbyists. This is not recommended for anyone under the age of 16.
- CNC Machined Metal Parts
- Molded Steel Bucket
- 6 Channel 2.4Ghz Radio
- Optimized Steel Hydraulic System
- Scale Operator Station (can fit a driving figure)
- Crawler Travel System
- Heavy Duty Hoses
- Powder-coated in White, Grey and Red
- Brushless System (Hydraulic)
- Lipo Cutoff
- Scale Interior
- Transmission Ratio: 1:109
- Battery Size:90 x 45 x 20mm / 3.54 x 1.77 x 0.78in
- Bucket Capacity: 155 x 65 x 42mm / 6.10 x 2.55 x1.65in
- Maximum Bucket Force: 1.5kg / 6.83lbs
- Scale: 1 : 14
- Length: 284mm / 11.1in
- Width: 156mm / 6.14in
- Height: 157mm / 6.18in
- Maximum Bucket Height: 235mm / 9.25in
- Maximum Bucket up and down Angle: 11 to 103 degrees
- Weight: 3.1kg / 6.8lbs
- Operating Oil Pressure: 3Mpa
- 1x 1/14 Scale R350 Compact Track Loader RTR
- Compatible Battery Charger
- 4x AA Batteries for Radio (Z-S1718)
- 5000mAh 7.4V 50C 2S1P Short-Size Lipo Battery Pack with T Style Plug
- While some components may come assembled, we recommend checking the
hardware and screws are all properly secure, especially after shipping.
As an option, you may want to apply thread lock to some of the installed
- ESC Supports bullet Connector
- Use good quality hex drivers to avoid stripping screw heads.
- Use thread lock when putting metal screws into metal parts.
- Steps marked with an asterisk (*) require thread lock.
- Use thread lock sparingly.
- Do not over tighten screws otherwise you may strip the thread.
- Battery Size should be within 90x45x20MM (LxWxH)
- Manufactured by JDCustoms 30 Days Limited Warranty