Due to the value of this product, the only forms of payment that will
be accepted are Affirm and Bank Transfer. Please do not choose Credit
Card or PayPal when checking out as we will cancel the order. Feel free
to email us at [email protected] if you have any questions.
Due to the size and weight of this product, this product has to be
shipped in its own container. It will be shipped only by Expedited
Shipping Service (5-8 days), this requires an extra shipping surcharge
of $300 to ship anywhere in the US and all international countries due
to the size and weight.
this surcharge should cover shipping fees to most international
countries, there may be some situations where the shipping fee may be
higher. In the event that this happens, we will reach out to you and
provide you with additional details. You may also email [email protected] before you place your order to request a shipping estimate to your shipping address.
note that the customer is responsible for any additional fees and
charges that may be incurred based on their country's clearance and tax
policies. Also, the product is subject to delays while going through
Notice: This product is for experienced RC hobbyists. This is not recommended for anyone under the age of 16.
- Alloy Zinc and Alloy Aluminum Casting (except Hydraulic Pump)
- Custom 8 Channel 2.4Ghz Radio
- Preinstalled High Intensity Light Sockets (Wire and bulbs are not included)
- Optimized Steel Hydraulic System
- Scale Driving Figure Ready (Not included)
- Alloy Zinc Molded Tracks (50mm Width)
- Efficient Undercarriage
- Reliable Hydraulic Valve and Adjustable Pump
- Heavy Duty Hoses (OD 4.5mm Nylon, ID 2.5mm)
- Undercarriage May Rotate 360 Degrees (Endless)
- Powder-coated in Yellow and Grey
- Massive Brushless System (Including driving and turning)
- Hydraulic System 60A Brushless ESC, Driving and Turning System 30A Brushless ESC
- 270Kv Brushless Monster Torque Motor, Shaft dia. 3.0mm
- XT60 Power Plug Female
- Run Time: 20 Minutes based on 4200mAh, 11.1V Battery
- Steel Machined Oil Pump (60mm x 60mm x 93mm)
- Digging Force: 15kg / 33lbs
- Max Lifting Force: 70Kg / 154lbs
- Driving Speed: 360 Meter per hour
- Lipo Cutoff
- Scale: 1:14
- Length: 823mm / 32.4in
- Width: 234mm / 9.21in
- Height: 260mm / 10.2in
- Operating Oil Pressure: 2.5Mpa
- Inside Cab Length: 4.72in / 120mm
- Inside Cab Width: 2.55in / 65mm
- Inside Cab Height: 4.21in / 107mm
- Deadweight: 26Kg / 57lbs
Click image below to enlarge photo.
- 1x 1/14 Scale RTR Earth Digger 360L Hydraulic Excavator (Yellow)
- Battery Size should be within 160x51x73MM(LxWxH).
- Must turn on the transmitter before starting the ESC.
- ESC Supports XT60 Connector
- This unit doesn't have a low voltage cut off. You will want to purchase a LiPo Battery Low Voltage Alarm to protect your battery. This is a common item in RC and should be available at most major online hobby shops.
- While some components may come assembled, we recommend checking the
hardware and screws are all properly secure, especially after shipping.
As an option, you may want to apply thread lock to some of the installed
- Use good quality hex drivers to avoid stripping screw heads.
- Use thread lock when putting metal screws into metal parts.
- Steps marked with an asterisk (*) require thread lock.
- Use thread lock sparingly.
- Do not over tighten screws otherwise you may strip the thread.
- Manufactured by JDCustoms 30 Days Limited Warranty