1/14 Scale Earth Mover 870K Hydraulic Wheel Loader (White)
The Earth Mover 870K is the most powerful wheel loader available today, created for the customer who requires reliability and high production in bulk earth moving or construction projects. CNC machined metal parts, fully assembled, ready to work! Massive power through 350kV brushless system.
This product is hand assembled. The vendor makes every effort to assemble with no imperfections, but due to the nature of this product and the amount of effort and work that goes into each one, it could have a few small blemishes.
Important Note: Due to the size and weight of this product, this product has to be shipped in its own container. It will be shipped only by Expedited Shipping Service (5-8 days), this requires an extra shipping surcharge of $300 to ship anywhere in the US and all international countries due to the size and weight. Must turn on the transmitter before starting the ESC.
Due to the value of this product, the only forms of payment that will
be accepted are Affirm and Bank Transfer. Please do not choose credit
card or Pay Pal or Credit Card when checking out as we will cancel the
order. Feel free to email us at [email protected] if you have any questions.
Important Note: This product is for experienced R/C users. Not recommended if you just started with R/C.
We can ship it in 1-2 weeks once the order is completed
- CNC Machined Metal parts
- Molded Steel bucket
- 6 channel 2.4Ghz radio
- Optimized Steel Hydraulic system
- Scale operator station (can fit a driving figure)
- Massive 29.5-25L-5 Tires
- Reliable hydraulic valve and adjustable pump
- Heavy Duty Hoses (OD 4.5mm Nylon, ID 2.5mm)
- Powder coated in white
- Brushless system (hydraulic)
- 40A brushless ESC with BEC
- Kv brushless monster torque Motor
- Realistic non functional disk break
- Scale ABC plastic interior
- Wheel with planetary gearbox build-in
- 2 speed full metal transmission (1:16 and 1:4 gear ratio)
- Realistic full metal Axles
- Run time is: 30 minutes (5000mAh Battery)
- Steel Machined oil pump (45mm X 30mm X 15.5mm)
- Bucket capacity:
- Maximum bucket force: 70kg / 154pounds
- Driving Speed: XXX meter per hour
- Scale: 1 : 14
- Length: 741mm / 29inch
- Width: 276mm / 11inch
- Height: 276mm / 11inch
- Maximum bucket Height: 461mm / 18inch
- Maximum bucket up and down angle: 46 to 64 degrees
- Maximum bucket left and right angle: 38 degrees
- Wheel base: 284mm
- Dead Weight: 20.5kg / 45lbs
- Total mass load: 32kg / 70lbs
- Operating oil pressure: 20Bar, 290psi
- Manufactured by JDCustoms
- 30 Days Limited Warranty
Courtesy photo provided by RC Sparks
- 1/14 Scale Earth Mover 870K Hydraulic Wheel Loader (White)
Radio Instruction Manual:
some components may come assembled, it may be in your best interests to
check the products to ensure all hardware is tight. In some cases you
may want to apply threadlock to some of the hardware that is already
- ESC Supports bullet Connector
- Use good quality hex drivers to avoid stripping screw heads.
- Use thread lock when putting metal screws into metal parts.
- Steps marked with an asterisk (*) require thread lock.
- Use thread lock sparingly.
- Do not over tighten screws otherwise you may strip the thread.
is made for heavy duty usage. Since there is no plastic parts, its
designed to last. But hydraulic pump, hoses and electronics system can
break over time. Do not let the system overheat during usage. We will
have all spare parts available for sell. Pump, hoses are electronics
system is not covered under warranty, but we do guarantee fully
functional at arrival. Each unit is full tested twice before we ship.
unit is professionally assembled, adjusted and tested. Do not adjust
the oil pressure switch. Oil pressure will drop as you operate over
This Wheel Loader is shipped without oil.
You will have to fill the tank your self (half tank), by using a funnel
or tube (not included).