1/14 8X8 Roll Off Hydraulic Dump RTR Truck

Write a Review

Your Price: $3,499.99

Retail Price:$4,304.99

Your Savings:$805.00(19%)

See more at rc4wd.com

Part Number: VV-JD00064

Availability: Out of Stock

Description

1/14 8X8 Roll Off Hydraulic Dump RTR Truck

Payment Information: Due to the value of this product, the only forms of payment that will be accepted are Affirm and Bank Transfer. Please do not choose Credit Card or PayPal when checking out as we will cancel the order. Feel free to email us at [email protected] if you have any questions.

Important Note: Due to the size and weight of this product, this product has to be shipped in its own container. It will be shipped only by Expedited Shipping Service (5-8 days), this requires an extra shipping surcharge of $300 to ship anywhere in the US and all international countries due to the size and weight.

While this surcharge should cover shipping fees to most international countries, there may be some situations where the shipping fee may be higher. In the event that this happens, we will reach out to you and provide you with additional details. You may also email [email protected] before you place your order to request a shipping estimate to your shipping address.

Please note that the customer is responsible for any additional fees and charges that may be incurred based on their country's clearance and tax policies. Also, the product is subject to delays while going through customs.

Notice: This product is for experienced RC hobbyists. This is not recommended for anyone under the age of 16.

Specifications:

Hard Plastic European Style Front Cab
Full Metal 3 Speed Transmission (Planetary Gears)
Transfer Case (Billet Aluminum)
Super Scale Leaf Spring Suspension Setup
Scale Rims (Stainless Steel / Billet Aluminum)
Remote Lockable Front and Rear Axles (Locking Differential)
Full Metal Front and Rear Axle Housing
Steel Scale Drive Shaft
Realistic Front Cab Latch
Molded Functional Fuel Tank
Automatic Trailer Gate
Controlled LED Light Modules
Realistic Engine Sound Simulator
Detachable Rear Dump
Rear Light Guard (Protects Against Rocks)
Scale Light Buckets (Fits 3-5mm LED)
Recommended Payload: 10kg / 22lbs
Maximum Lift Power: 42kg / 92lbs
LiPo Cutoff
Fully Painted
Scale Wheel/Tire
Cylinder Maximum Thrust: 109kg / 231lbs
Brushed Driven Motor
930KV Brushless Motor-Driven Micro Hydraulic Pump
Length: 680mm / 26.7in
Width: 190mm / 7.48in
Height: 270mm / 10.6in
Weight: 10kg / 22lbs
First Gear 1/113, Second Gear 1/86.4, Third Gear 1/62.1 (Transmission)
Basic 10 Channel 2.4Ghz Radio

Replacement Parts:

Earth Digger 4200XL Excavator Brushed ESC (VVV-S0011)

Required Parts:

5000mAh 11.1V 50C 3S1P LiPo Battery Pack with XT60 Plug (Battery size must be no bigger than 140mm in length, 45mm in width, and 25mm in height)
Compatible Battery Charger
4x AA Batteries for Radio (Z-S1718)
Chevron AW ISO 32 Hydraulic Oil 14oz (Z-X0042)

Optional Parts:

Twister Extreme Hi-Voltage Coreless Metal Gear Digital Waterproof Servo (Z-E0125)
Twister High Torque Metal Gear Digital Servo (Z-E0035)
Hauler Super Wide 1.7" Commercial 1/14 Semi Truck Tires (Z-T0071)
Long Haul 1.7" Commercial 1/14 Semi Truck Tires (Z-T0026)
LoRider 1.7" Commercial 1/14 Semi Truck Tires (Z-T0066)
Roady 1.7" Commercial 1/14 Semi Truck Tires (Z-T0032)
Roady Super Wide 1.7" Commercial 1/14 Semi Truck Tires (Z-T0072)

Instruction Manual:

Click here to download

Notes:

When raising the dump bed, do not leave at upper-most position for more than 2 seconds, doing so may cause damage to the hydraulic system.
Do not push/pull the truck by the tailgate, doing so may cause damage to the locking mechanism.
Do not use more than 3S battery. (11.1 volt(s))
Do not try to operate lift past its fully-extended height, doing so may cause damage to hydraulic system.
Must turn on the transmitter before starting the ESC.
ESC Supports XT60 Connector
While some components may come assembled, we recommend checking the hardware and screws are all properly secure, especially after shipping. As an option, you may want to apply thread lock to some of the installed hardware.
Use good quality hex drivers to avoid stripping screw heads.
Use thread lock when putting metal screws into metal parts.
Steps marked with an asterisk (*) require threadlock.
Use threadlock sparingly.
Do not over tighten screws, or you may strip the thread.
This product is for experienced R/C users. Not recommended for beginners.
The axle hubs can be removed, but may require additional force.
This Product Is Professionally Pre-assembled
Manufactured by JDCustoms 30 Days Limited Warranty
This JDM Product ships in carton packaging with a padded shipping crate inside for added protection.
This shipping crate solely protects this JDM product through the shipping process. Any other case utilization is outside of its intended purpose.

1/14 8x8 Armageddon Hydraulic Dump Truck (FMX)

$2,141.99

Out of Stock

Add to Wish List

Add To Cart

[history_item_name]

[ITEMPRICE] ~~[ITEMPRICE] Original price~~ [ITEMSALEPRICE] Sale

Clear

1/14 8X8 Roll Off Hydraulic Dump RTR Truck

Related Items

Recently Viewed Items

rc4wd Newsletter!