1/14 8x8 Armageddon Hydraulic Dump Truck (FMX) (Orange and Silver)
1/14 8x8 Armageddon Hydraulic Dump Truck (FMX) (Orange and Silver)

1/14 8x8 Armageddon Hydraulic Dump Truck (FMX) (Orange and Silver)

Your Price: $2,799.99
Retail Price:$3,443.99
Your Savings:$644.00(19%)
In stock
Part Number:VV-JD00050
1/14 8x8 Armageddon Hydraulic Dump Truck (FMX) (Orange and Silver)

The Armageddon is one of the most powerful R/C Hydraulic Dump Trucks available today. It is highly detailed and based on the European style dump trucks. It is engineered specifically for the tough demands of transporting gravel, sand, asphalt, snow, wood chips or rocks. Created for the customer who requires reliability and high production in bulk earth moving or construction projects. It's made with CNC machined metal parts, fully assembled, ready to work! Be ready for the massive power through the 930KV high speed output brushless hydraulic system.

Payment Information: Due to the value of this product, the only forms of payment that will be accepted are Affirm and Bank Transfer. Please do not choose credit card or Pay Pal or Credit Card when checking out as we will cancel the order. Feel free to email us at [email protected] if you have any questions.

Important Note: Due to the size and weight of this product, this product has to be shipped in its own container.  It will be shipped only by Expedited Shipping Service (5-8 days), this requires an extra shipping surcharge of $300 to ship anywhere in the US and all international countries due to the size and weight.

New 3-Speed Transmission gives you three optional gearings to better take on the terrain you're playing in, tackle your scale construction site no matter the situation.

  • Hard Plastic European Style Front Cab
  • Full Metal 3 Speed Transmission (Planetary Gears)
  • Transfer Case (Billet Aluminum)
  • Super Scale Leaf Spring Suspension Setup
  • Scale Rims (Stainless Steel / Billet Aluminum)
  • Remote Lockable Rear Axle (Locking Differential)
  • Full Metal Front and Rear Axle Housing
  • Steel Scale Drive Shaft
  • Realistic Front Cab Latch
  • Steel Ladder
  • Spare Tire Included
  • Molded Functional Fuel Tank
  • Automatic Trailer Gate (Do Not Attempt to Open by Hand)
  • Rear Light Guard (Protects Against Rocks)
  • Scale Light Buckets (Fits 3-5mm LED)
  • Recommended Payload: 15kg / 33lbs
  • Maximum Lift Power: 42kg / 92lbs
  • Fully Painted
  • Scale Wheel/Tire
  • Cylinder Maximum Thrust: 109kg / 231lbs
  • Brushed Driven Motor
  • 930KV Brushless Motor-Driven Micro Hydraulic Pump
  • Length: 690mm / 27.1 inch
  • Width: 186mm / 7.3 inch
  • Height: 262mm / 10.3 inch
  • Weight: 9.7kg / 21.3lbs
  • Axle Gear Ratio: 9:1
  • Transfer Case Gear Ratio: 6:1
  • Theoretical Load: 15kg / 33 lbs
  • Load Total Mass: 24.5kg / 54 lbs
  • First Gear 6.7:1, Second Gear 5:1, Third Gear 3.7:1 (Transmission)
  • Basic 6 Channel 2.4Ghz Radio
  • This Product Is Professionally Pre-assembled
  • Manufactured by JDCustoms 30 Days Limited Warranty

What's Included:
  • 1x 1/14 8x8 Armageddon Hydraulic Dump Truck (FMX) (Orange and Silver)

Replacement Parts:

Required Parts:

Optional Parts:

Armageddon Manual:

  • When raising the dump bed, do not leave at upper-most position for more than 2 seconds, doing so may cause damage to the hydraulic system.
  • Do not push/pull the truck by the tailgate, doing so may cause damage to the locking mechanism.
  • Do not use more than 3S battery. (11.1 volt(s))
  • Do not try to operate lift past its fully-extended height, doing so may cause damage to hydraulic system.
  • Must turn on the transmitter before starting the ESC.
  • ESC Supports XT60 Connector
  • The ESC does not have lipo cut off.
  • While some components may come assembled, it may be in your best interests to check the products to ensure all hardwares are tight. In some cases you may want to apply threadlock to some of the hardwares that were already installed.
  • Use good quality hex drivers to avoid stripping screw heads.
  • Use thread lock when putting metal screws into metal parts.
  • Steps marked with an asterisk (*) require threadlock.
  • Use threadlock sparingly.
  • Do not over tighten screws, or you may strip the thread.
  • This product is for experienced R/C users. Not recommended for beginners.
  • The axle hubs can be removed, but may require additional force.
  • Speaker included, but sounds unit sold separate. (VVV-S0074)

Related Items


Recently Viewed Items