Specification:

• Motor Compatibility: 380, 540 size brushed
• Input Cells: 2-3S LiPo or 4-9 NiMH
• Size: 1.15 x 0.95 x 0.66" (29.0 x 24.3 x 16.8mm)
• Weight: 0.64oz. (18.1g) without wires
• On-Resistance: 0.00036 ohms 540
• Motor Limit: 20T or higher (2S or 3S brushless motor) 380
• Motor Limit: Any 380-size brushed motor BEC: 6V DC/3A
• Wire Size: 14G Super-Flex Copper-Strand Silicone Wire
• #5463 3A BEC module allows 3S LiPo battery usage
• Compatible with all Novak brushed motors including the Terra Claw and Rock Star motors
• Compatible with 2-3S LiPo cells and 4-9 cell NiMH batteries
• Three throttle modes; Rock Crawl Mode with adjustable drag brake power, Standard/Basher Mode for normal FWD/BRK/REV, Robotic or Servo Mode for FWD/REV operation only
• Four adjustable parameters; Brake Power/Throttle Mode (5 settings),Dead Band (5 settings), Drive Frequency (5 settings), Voltage Cut-Off
• Non-crawling basher mode can be used in any 1/10, 1/12, 1/16, or 1/18 scale application with a 20 turn or higher brushed motor
• One-Touch programming interface with four multi-colored status LEDs
• 6V output for cooling fan or other options such as running lights
• Temperature monitoring allows user to check
• ESC operating temperature at any time
• Thermal overload protection to prevent overheating
• Water-resistant case with silicone gasket seal
• One touch setup RoHS compliant
• 120 day limited warranty beginning date of purchase

What's Included:

• 1x Novak Eiger Pro Brushed ESC with Gold Plated Bullet Motor Plugs
• Mounting Tape
• Power Cap, Wires
• Heat Sink, 3A BEC Module
• Instruction Manual