Bully Comp 2.2 Front & Rear Axle

Bully Comp 2.2 Front & Rear Axle

Your Price:$139.99
Retail Price:$172.19
Your Savings:$32.20(19%)
Out of Stock
Part Number:Z-A0020

Bully 2 Comp 2.2 Axle with Knuckles (Front) and Straight Axle Tube (Rear)

The best MOA (Motor On Axle) on the market just got a lot better, stronger alloy and 60% heavier! Bully axle is created based on crawlers feedback! 40:1 Gear Ratio, 6mm Wide Steel Gears, Motor close to the Axle Tubes, 8mm XVD (Xtreme Velocity Drive) v4, Flat top on Axle tube, thick steering arms, round Knuckles for extreme Steering angle, rear straight Axle, round C for absorbing impact, clocked gear case.


Specifications:

  • Zinc Alloy Housing
  • Hardened Steel Gears
  • Full Ball Bearings
  • Powder coated in Gun Metal black
  • Designed to meet the 266mm comp Rig Width standard
  • Engineered & Manufactured by RC4WD
  • 12mm Steel Wheel Hex
  • Gear Ratio: 38.42 :1
  • Hex to Hex Width: 7.60in / 193mm
  • Pin to Pin Width: 7.12in / 181mm
  • Pumpkin Height: 2.95in / 75mm
  • Leaf Mount Width (Front): 3.97in / 101mm
  • Leaf Mount Width (Rear): 5.47in / 139mm
  • Weight (Front and Rear): 1.18kg / 2.6lbs
  • Weight (Front): 22.3oz / 632g
  • Weight (Rear): 20.2oz / 573g





Bully Axle is manufactured with state of the art equipment and created based on a special mixture of zinc alloy.



Bully Axle in action:






What's Included:

  • 1x Bully 2.2 Front Axle with Knuckles
  • 1x Bully 2.2 Rear Straight Axle
  • 2x Upper 4 Links Mount
  • 4x Lower 4 Links Mount
  • 2x Motor 12T Pinion Gears (Black)
  • 2x Bully Axle Clear Dust Cover

Other Axles:

  • Bully Comp 2.2 Axle (Front)
  • Super Bully Comp Axle with Knuckles (Z-A0028)
  • Super Bully Light Weight Axle with 65:1 Gearbox (Z-A0044)
  • Bully 2 Competition Crawler Front Axle (Z-A0012)
  • Bully 2 Competition Crawler Rear Axle (Z-A0084)
Replacement Parts:
  • Bully 2.2 Straight Axle Shaft v4 (Z-S0019)
  • Super & Bully 2.2 XLD Axle Gears (Z-S0077)
  • Bully 2.2 F&R Axle Housing Replacement Parts (Z-S0577)
  • Metal Shield Bearing 8x12x3.5mm (Z-S0681)
  • Metal Shield Bearing 6x10x3mm (Z-S0680)
  • Metal Shield Bearing 5x10x4mm (Z-S0686)

Optional Parts:
  • Predator Track Front Axle Fitting Kit for Bully Axles (Z-S1201)
  • RC4WD 12mm Mini Hex Wheel Widener Set (+15mm) (Z-S0407)

Notes: 

  • While some components may come assembled, it may be in your best interests to check the products to ensure all hardware is tight. In some cases you may want to apply threadlock to some of the hardware that is already installed.
  • The gears don't come pre-lubed. You will need to remove the front cover and use your preferred lubrication or part # Z-S1199 and Z-S1197 (Monster Lube)
  • This axle is designed to fit any type of wheels that has a 12mm back hex.
  • Uses M2 x 6mm (Z-S0994) and M2 x 5mm (Z-S0738) for Clear cover
  • To get more width, you can use 12mm widener (Z-S0449)
5 Stars
Diy. Builder
Awesome, heavy duty and heavy
Did you find this helpful?  0 of 1 Found Helpful
Reviewed by:  from Cloverdale. on 6/30/2016
5/5

Related Items

Recently Viewed Items